IEC62196 Electric Vehicle Plug And Connector Breaking Capacity Test Equipment
Complied Standards & Clauses
IEC 62196-1 Ed.4CDV 2020 clause 22, 23.2, 23.3, fig 15, table 8 and table 9.
IEC 62196-3 Ed.4CDV 2020 clause 22 and 23.
IEC 60309-1: 2012 clause 20 and clause 21.
Equipment Overview
This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc.
It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during normal operation without excessive wear or other harmful effects.
The servo motor drives the mechanism to make the test samples repeat insertion and withdrawal actions. An external load can be used for the breaking capacity test. The power on / off time, test speed, stroke, and angle can all be preset on the touch screen.
The equipment uses servo motor drive mechanism, the sample to do linear plug and pull repeated action, can be connected to the load on and off test. The on-off time, test speed, stroke and Angle can be preset through the touch screen.
Power supply: AC220V±10%/50-60Hz, working temperature 0-40℃ humidity 30%-90%;
Appearance size: about W1000*D750*H1200mm; Weight: about 180kg
Technical Parameters
| Station |
Single position, customizable |
| Electrical control mode |
PLC intelligent integrated control, color man-machine touch interface operation |
| Drive way |
Servo motor drive |
| Sample holding mode |
Mechanical clamping, 3 axis clamps can adjust the position of the clamping point |
| Linear trip |
0-100mm, preset (test plug and test socket spacing ≥50mm) |
| Conduction time |
0-99.9s, preset (electrical contact should be maintained not more than 4s, not less than 2s) |
| Insertion rate |
0-0.85m/s can be preset, preset (0.8±0.1m/s) |
| Number of tests |
0~999999 times, preset (cycle: one insertion stroke and one pull-out stroke) |
| The test frequency |
0-10 times /min, preset (3.75 cycle /min=7.5 stroke /min) |
| load |
External, provide the standard voltage, current and power factor, optional load cabinet |
| Optional load cabinet |
Note: Only AC load cabinet, 0-70A, 0-300V voltage |
| Test Contents |
Appliance coupler/charging interface breaking capacity test
Appliance coupler / charging interface normal operating life test |
| Detection Function |
An open circuit alarm can be realized during testing under load, and the cycles can be recorded real in time. |
| Safety Protection |
Ground protection, short circuit protection |
| Power Supply |
Single phase AC220V±10%, 50/60Hz, 10A |
|
Equipment Dimension
& Weight |
L 1430mm * W 600mm * H1620mm, approx. 180KGS |
Product Tags:
|
|
IEC 62196 EV Connector Testing Equipment Breaking Capacity Test Equipment Images
|
